Skip to main content

Print Guide

***Next Level Apparel is providing the below information as a reference guide only. Actual temperatures, drying times, inks, or other elements of the printing process might vary based on equipment, location or any other number of factors. A test sample run is highly recommended, especially if you have a large order or if your printer does not specialize in printing on blended fabrics. Next Level Apparel assumes no liability for providing the above information. For more information please contact sales@nextlevelapparel.com***

Fine Jersey
32 Single, 145 grams 4.3oz
100% Combed Ring Spun Cotton
Plastisol - Soft hand, flash about 180 degrees if needed, cure ink 320 degrees.
Water base Ink - Flash about 180 degrees if needed, cure at 320 degrees for 90 seconds.

Lightweight Jersey
34 Single, 135 Grams, 4.0oz
100% Combed Ring Spun Cotton
Plastisol - Soft hand, flash about 180 degrees if needed, cure ink 320 degrees.
Water base Ink - Flash about 180 degrees if needed, cure at 320 degrees for 90 seconds.

CVC Jersey
32 Single, 145 grams, 4.3oz
60% Combed Ring-Spun Cotton 40% Polyester
Plastisol - Soft hand, flash about 180 degrees if needed, cure ink 320 degrees.
Water base Ink - Flash about 180 degrees if needed, cure at 320 degrees for 90 seconds.

Sueded Jersey
32 Single, 145 grams, 4.3oz
60% Combed Ring-Spun Cotton 40% Polyester
Plastisol -  Soft hand, flash about 180 degrees if needed, cure ink 320 degrees.
Water base Ink - Flash about 180 degrees if needed, cure at 320 degrees for 90 seconds.

Spandex Jersey
40 Single, 145 grams, 4.3oz
57% Combed Ring-Spun Cotton 38% Polyester 5% Spandex
Plastisol - Soft hand, flash about 180 degrees if needed, cure ink 320 degrees. Stretch additive recommended.
Water base Ink - Flash about 180 degrees if needed, cure at 320 degrees for 90 seconds.

Lightweight French Terry
30 Single, 165 grams, 4.9oz
50% Combed Ring-Spun Cotton 50% Polyester
Plastisol - Soft hand, flash about 180 degrees if needed, cure ink 320 degrees.
Water base Ink - Flash about 180 degrees if needed, cure at 320 degrees for 90 seconds.

Tri-Blend Jersey
32 Single, 120 grams, 3.5oz
50% Polyester 25% Combed Ring-Spun Cotton 25% Rayon
Plastisol - Soft hand, low flash temperature cure ink 320 degrees.
Water base Ink - Low flash temperature, cure at 320 degrees for 90 seconds.

65/35 Poly Cotton Heathers 
40 single, 120 grams, 3.5oz
65% Polyester 35% Combed Ring-Spun Cotton
Plastisol - Soft hand, low flash temperature cure ink 320 degrees.
Water base Ink - Low flash temperature, cure at 320 degrees for 90 seconds.

Burnout Jersey
32 single, 125 grams, 3.7oz
65% Polyester 35% Combed Ring-Spun Cotton
High mesh count recommended.
Plastisol - Soft hand, low flash temperature cure ink 320 degrees.
Water base Ink - Low flash temperature, cure at 320 degrees for 90 seconds.

Waffle Thermal
36 Single, 190 grams, 5.6oz
60% Combed Ring-Spun Cotton 40% Polyester
Plastisol - Soft hand, flash about 180 degrees if needed, cure ink 320 degrees. Stretch additive recommended.
Water base Ink - Flash about 180 degrees if needed, cure at 320 degrees for 90 seconds.

Lightweight Cotton Poly Jersey
30 Single, 135 grams, 4.0oz
60% Combed Ring-Spun Cotton 40% Polyester
Plastisol - Soft hand, flash about 180 degrees if needed, cure ink 320 degrees.
Water base Ink - Flash about 180 degrees if needed, cure at 320 degrees for 90 seconds.

Mock Twist Jersey
20 Single, 175 grams, 5.1oz 
60% Combed Ring-Spun Cotton 40% Polyester
Plastisol - Soft hand, flash about 180 degrees if needed, cure ink 320 degrees. 
Water base Ink - Flash about 180 degrees if needed, cure at 320 degrees for 90 seconds.

Inspired Dye (garment dye)
24 Single, 175 grams, 5.2oz 
100% Combed Ring-Spun Cotton 
Plastisol - Soft hand, flash about 180 degrees if needed, cure ink 320 degrees. 
Water base Ink - Flash about 180 degrees if needed, cure at 320 degrees for 90 seconds.
Due to the unique pigment dying process we suggest the following:

  • use methods and inks specific to avoiding dye migration
  • when applying white ink, use a gray plastisol blocker under base, flash then poly white

Midweight French Terry
5.3oz 
60% Combed Ring-Spun Cotton 40% Polyester Fleece
Plastisol - Soft hand, flash about 180 degrees if needed, cure ink 320 degrees. 
Water base Ink - Flash about 180 degrees if needed, cure at 320 degrees for 90 seconds.

PCH Fleece
7.4oz 
60% Combed Ring-Spun Cotton 40% Polyester
Plastisol - Soft hand, flash about 180 degrees if needed, cure ink 320 degrees. 
Water base Ink - Flash about 180 degrees if needed, cure at 320 degrees for 90 seconds.

Denim Fleece
7.4oz 
53% Combed Ring-Spun Cotton 47% Polyester
Plastisol - Soft hand, flash about 180 degrees if needed, cure ink 320 degrees. 
Water base Ink - Flash about 180 degrees if needed, cure at 320 degrees for 90 seconds.